| Description | The K3010P(G) series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual inline package. The elements are mounted on one leadframe using a coplanar technique, providing a fixed distance between input and output for highest safety req... |
| Features |
Approvals:
D Rated recurring peak voltage (repetitive)
VIORM = 600 VRMS D Creepage current resistance according to VDE 0303/IEC 112 Comparative Tracking Index: CTI = 275 D Thickness through insulation ≥ 0.75 mm General features:
D BSI: BS EN 41003, BS EN 60095 (BS 415),
BS EN 60950 (BS 7002), Certificate number 7081 and 7402
D FIMKO (SETI): EN 60950,
Certificate number 12398
D Underwriters Laboratory (UL) 1577 recognized,
file number E-76222
D VDE 0884, Certificate number 94778
VDE 0884 related features:
D Rated impulse voltage (transient overvoltage)
VIOTM = 6 kV peak D Isolation test v...
|
| Datasheet |
 K3012P Datasheet - 145.98KB |
| Part Number | Description |
|---|---|
 KODENSHI KOREA CORP |
Photocoupler(These Photocouplers consist of a Gallium Arsenide Infrared Emitting) Photocoupler K301 • K302 • K304 These Photocouplers consist of a Gallium Arsenide Infrared Emitting Diode and a Silicon NPN Photo Darlington transistor per a channel. The K301 has one channel in a 4-pin mini-flat SMD package. The K302 has two channels in a 8-pin mini-flat SMD package. The K304 has four channels in a 16-pin mini-flat SMD package. FEATURES • Mini-flat Package • Collector-Emitter Voltage : Min.30V • Current Transfer Ratio : Type 600% (at IF=1mA, VCE=2V) • Electrical Isolation Voltage : AC3750Vrms APPLICATIONS • Interface between two circuits of different potential • Telephone Line Receiver • Automatic Vending Machine • Power Supply Regulators DIMENSION K301 4 0.2 (Unit : m... |
 Cosmo |
4PIN PHOTOTRANSISTOR The K3010 series consist of two infrared emitting diodes, connected in inverse parallel, optically coupled to a phototransistor detector. They are packaged in a 4-pin DIP package and available in wide-lead spacing and SMD option. Features 1.Current transfer ratio ( CTR：Min. 50% at IF=± 1mA VCE=5V ) 2.High isolation voltage between input and output ( Viso：5000Vrms ) 3.Pb free and RoHS compliant 4.MSL class 1 5.Agency Approvals • UL Approved (No. E169586): UL1577 • c-UL Approved (No. E169586) • VDE Approved (No. 101347): DIN EN60747-5-5 • FIMKO Approved: EN60065, EN60950, EN60335 • SEMKO Approved: EN60065, EN60950, EN60335 • CQC Approved: GB8898-2011, GB4943.1-2011 K3010 Series 4PIN PHOTOTR... |
Cosmo |
4PIN PHOTOTRANSISTOR The K3010 series consist of two infrared emitting diodes, connected in inverse parallel, optically coupled to a phototransistor detector. They are packaged in a 4-pin DIP package and available in wide-lead spacing and SMD option. Features 1.Current transfer ratio ( CTR：Min. 50% at IF=± 1mA VCE=5V ) 2.High isolation voltage between input and output ( Viso：5000Vrms ) 3.Pb free and RoHS compliant 4.MSL class 1 5.Agency Approvals • UL Approved (No. E169586): UL1577 • c-UL Approved (No. E169586) • VDE Approved (No. 101347): DIN EN60747-5-5 • FIMKO Approved: EN60065, EN60950, EN60335 • SEMKO Approved: EN60065, EN60950, EN60335 • CQC Approved: GB8898-2011, GB4943.1-2011 K3010 Series 4PIN PHOTOTR... |
Cosmo |
4PIN PHOTOTRANSISTOR The K3010 series consist of two infrared emitting diodes, connected in inverse parallel, optically coupled to a phototransistor detector. They are packaged in a 4-pin DIP package and available in wide-lead spacing and SMD option. Features 1.Current transfer ratio ( CTR：Min. 50% at IF=± 1mA VCE=5V ) 2.High isolation voltage between input and output ( Viso：5000Vrms ) 3.Pb free and RoHS compliant 4.MSL class 1 5.Agency Approvals • UL Approved (No. E169586): UL1577 • c-UL Approved (No. E169586) • VDE Approved (No. 101347): DIN EN60747-5-5 • FIMKO Approved: EN60065, EN60950, EN60335 • SEMKO Approved: EN60065, EN60950, EN60335 • CQC Approved: GB8898-2011, GB4943.1-2011 K3010 Series 4PIN PHOTOTR... |
Cosmo |
4PIN PHOTOTRANSISTOR The K3010 series consist of two infrared emitting diodes, connected in inverse parallel, optically coupled to a phototransistor detector. They are packaged in a 4-pin DIP package and available in wide-lead spacing and SMD option. Features 1.Current transfer ratio ( CTR：Min. 50% at IF=± 1mA VCE=5V ) 2.High isolation voltage between input and output ( Viso：5000Vrms ) 3.Pb free and RoHS compliant 4.MSL class 1 5.Agency Approvals • UL Approved (No. E169586): UL1577 • c-UL Approved (No. E169586) • VDE Approved (No. 101347): DIN EN60747-5-5 • FIMKO Approved: EN60065, EN60950, EN60335 • SEMKO Approved: EN60065, EN60950, EN60335 • CQC Approved: GB8898-2011, GB4943.1-2011 K3010 Series 4PIN PHOTOTR... |
Cosmo |
4PIN PHOTOTRANSISTOR The K3010 series consist of two infrared emitting diodes, connected in inverse parallel, optically coupled to a phototransistor detector. They are packaged in a 4-pin DIP package and available in wide-lead spacing and SMD option. Features 1.Current transfer ratio ( CTR：Min. 50% at IF=± 1mA VCE=5V ) 2.High isolation voltage between input and output ( Viso：5000Vrms ) 3.Pb free and RoHS compliant 4.MSL class 1 5.Agency Approvals • UL Approved (No. E169586): UL1577 • c-UL Approved (No. E169586) • VDE Approved (No. 101347): DIN EN60747-5-5 • FIMKO Approved: EN60065, EN60950, EN60335 • SEMKO Approved: EN60065, EN60950, EN60335 • CQC Approved: GB8898-2011, GB4943.1-2011 K3010 Series 4PIN PHOTOTR... |
 Vishay Telefunken |
Optocoupler with Phototriac Output The K3010P(G) series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual inline package. The elements are mounted on one leadframe using a coplanar technique, providing a fixed distance between input and output for highest safety requirements. Applications Circuits for safe protective separation against electrical shock according to safety class II (reinforced isolation): 14827 D For appl. class I – IV at mains voltage ≤ 300 V D For appl. class I – III at mains voltage ≤ 600 V according to VDE 0884, table 2, suitable for: Monitors, air conditioners, line switches, solid state relays, microwaves. ~ 6 5 ~ 4 VDE Standards T... |
Vishay Telefunken |
Optocoupler with Phototriac Output The K3010P(G) series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual inline package. The elements are mounted on one leadframe using a coplanar technique, providing a fixed distance between input and output for highest safety requirements. Applications Circuits for safe protective separation against electrical shock according to safety class II (reinforced isolation): 14827 D For appl. class I – IV at mains voltage ≤ 300 V D For appl. class I – III at mains voltage ≤ 600 V according to VDE 0884, table 2, suitable for: Monitors, air conditioners, line switches, solid state relays, microwaves. ~ 6 5 ~ 4 VDE Standards T... |
Vishay Telefunken |
Optocoupler with Phototriac Output The K3010P(G) series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual inline package. The elements are mounted on one leadframe using a coplanar technique, providing a fixed distance between input and output for highest safety requirements. Applications Circuits for safe protective separation against electrical shock according to safety class II (reinforced isolation): 14827 D For appl. class I – IV at mains voltage ≤ 300 V D For appl. class I – III at mains voltage ≤ 600 V according to VDE 0884, table 2, suitable for: Monitors, air conditioners, line switches, solid state relays, microwaves. ~ 6 5 ~ 4 VDE Standards T... |
Vishay Telefunken |
Optocoupler The K3010P(G) series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual inline package. The elements are mounted on one leadframe using a coplanar technique, providing a fixed distance between input and output for highest safety requirements. Applications Circuits for safe protective separation against electrical shock according to safety class II (reinforced isolation): 14827 D For appl. class I – IV at mains voltage ≤ 300 V D For appl. class I – III at mains voltage ≤ 600 V according to VDE 0884, table 2, suitable for: Monitors, air conditioners, line switches, solid state relays, microwaves. ~ 6 5 ~ 4 VDE Standards T... |
Vishay Telefunken |
Optocoupler The K3010P(G) series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual inline package. The elements are mounted on one leadframe using a coplanar technique, providing a fixed distance between input and output for highest safety requirements. Applications Circuits for safe protective separation against electrical shock according to safety class II (reinforced isolation): 14827 D For appl. class I – IV at mains voltage ≤ 300 V D For appl. class I – III at mains voltage ≤ 600 V according to VDE 0884, table 2, suitable for: Monitors, air conditioners, line switches, solid state relays, microwaves. ~ 6 5 ~ 4 VDE Standards T... |
Vishay Telefunken |
Optocoupler The K3010P(G) series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual inline package. The elements are mounted on one leadframe using a coplanar technique, providing a fixed distance between input and output for highest safety requirements. Applications Circuits for safe protective separation against electrical shock according to safety class II (reinforced isolation): 14827 D For appl. class I – IV at mains voltage ≤ 300 V D For appl. class I – III at mains voltage ≤ 600 V according to VDE 0884, table 2, suitable for: Monitors, air conditioners, line switches, solid state relays, microwaves. ~ 6 5 ~ 4 VDE Standards T... |
Vishay Telefunken |
Optocoupler The K3010P(G) series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual inline package. The elements are mounted on one leadframe using a coplanar technique, providing a fixed distance between input and output for highest safety requirements. Applications Circuits for safe protective separation against electrical shock according to safety class II (reinforced isolation): 14827 D For appl. class I – IV at mains voltage ≤ 300 V D For appl. class I – III at mains voltage ≤ 600 V according to VDE 0884, table 2, suitable for: Monitors, air conditioners, line switches, solid state relays, microwaves. ~ 6 5 ~ 4 VDE Standards T... |
 Toshiba Semiconductor |
2SK3017 2SK3017 TOSHIBA Field Effect Transistor Silicon N Channel MOS Type (π−MOSIII) 2SK3017 DC−DC Converter, Relay Drive and Motor Drive Applications z Low drain−source ON resistance z High forward transfer admittance z Low leakage current z Enhancement mode www.DataSheet4U.com : RDS (ON) = 1.05 Ω (typ.) : |Yfs| = 7.0 S (typ.) Unit: mm : IDSS = 100 μA (max) (VDS = 720 V) : Vth = 2.0~4.0 V (VDS = 10 V, ID = 1 mA) Absolute Maximum Ratings (Ta = 25°C) Characteristics Drain−source voltage Drain−gate voltage (RGS = 20 kΩ) Gate−source voltage Drain current DC (Note 1) Symbol VDSS VDGR VGSS ID IDP PD EAS IAR EAR Tch Tstg Rating 900 900 ±30 8.5 25.5 90 966 8.5 9 150 −55~150 Unit V V V A A W mJ A mJ °C ... |